https://ogma.newcastle.edu.au/vital/access/ /manager/Index ${session.getAttribute("locale")} 5 https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:17010 Wed 11 Apr 2018 13:30:41 AEST ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:17005 61-butyric acid methyl ester (PCBM) and P3HT:indene-C₆₀ bisadduct (ICBA) polymer solar cells, with Ca/Al and Ca/Ag cathodes and indium tin oxide/poly(ethylene-dioxythiophene):polystyrene sulfonate anode have been investigated. Degradation occurs via a combination of three primary pathways: (1) cathodic oxidation, (2) active layer phase segregation, and (3) anodic diffusion. Fully degraded devices were subjected to thermal annealing under inert atmosphere. Degraded solar cells possessing Ca/Ag electrodes were observed to regenerate their performance, whereas solar cells having Ca/Al electrodes exhibited no significant regeneration of device characteristics after thermal annealing. Moreover, the solar cells with a P3HT:ICBA active layer exhibited enhanced regeneration compared to P3HT:PCBM active layer devices as a result of reduced changes to the active layer morphology. Devices combining a Ca/Ag cathode and P3HT:ICBA active layer demonstrated ∼50% performance restoration over several degradation/regeneration cycles.]]> Wed 11 Apr 2018 10:49:00 AEST ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:20718 Sat 24 Mar 2018 08:06:21 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:29999 3/P3HT:ICBA/Ca/Al devices using the three main ISOS standard testing protocols: (a) ISOS-D-1, (b) ISOS-O-1 and (c) ISOS-L-1. We show that: (1) ITO/MoO₃/P3HT:ICBA/Ca/Al devices are more stable than their PEDOT counterparts under the ISOS-D-1 protocol, as has been reported previously. (2) Under the ISOS-O-1 protocol, unencapsulated MoO₃ based devices are more stable than the equivalent PEDOT device but, when encapsulated, the degradation rates of the MoO₃ and PEDOT devices are the same. (3) By contrast, when measured under the ISOS-L protocol, the MoO₃ based devices are either equivalent to (unencapsulated devices) or, indeed, actually degrade faster (encapsulated devices) that their PEDOT counterparts. We demonstrate that these differences arise from the dominant degradation mode changing under the different protocols. As such, this paper highlights that the choice of testing protocol significantly influences the reported stability of OPV devices. In particular, the ISOS-D and ISOS-L protocols do not necessary reflect OPV device performance under actual operating conditions and thus stability measurements using these protocols should be treated with caution.]]> Sat 24 Mar 2018 07:28:53 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:28252 Sat 24 Mar 2018 07:28:36 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:28349 g) and amorphous nature, compared to the commonly applied semicrystalline polymer poly(3-hexylthiophene) (P3HT). This study reports the optimisation of TQ1:PC₇₁BM (phenyl C₇₁ butyric acid methyl ester) NP-OPV device performance by the application of mild thermal annealing treatments in the range of the T_g (sub-T_g and post-T_g), both in the active layer drying stage and post-cathode deposition annealing stage of device fabrication, and an in-depth study of the effect of these treatments on nanoparticle film morphology. In addition, we report a type of morphological evolution in nanoparticle films for OPV active layers that has not previously been observed, that of PC₇₁BM nano-pathway formation between dispersed PC₇₁BM-rich nanoparticle cores, which have the benefit of making the bulk film more conducive to charge percolation and extraction.]]> Sat 24 Mar 2018 07:25:10 AEDT ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:38226 75 μm), was 13.4% higher under CT, but mesoporosity (30–75 μm) was 9.6% higher under NT. The vertical distributions of root biomass and root architecture measurements (i.e. root length density) in undisturbed soil cores were 9.6% higher under the NT and 8.7% higher under the CT system respectively. These results suggest that low soil disturbance under the continuous NT system may have encouraged accumulation of more root biomass in the top 100 mm depth, thus developing better soil structure. Overall, µXCT image analyses of soil cores indicated that this tillage shift affected the soil total carbon, due to the significantly higher soil-pore (i.e. pore surface area, porosity and average pore size area) and root architecture (i.e. root length density, root surface density and root biomass) measurements under the CT system.]]> Mon 16 Aug 2021 15:47:54 AEST ]]> https://ogma.newcastle.edu.au/vital/access/ /manager/Repository/uon:42295 Fri 19 Aug 2022 14:58:40 AEST ]]>